
Terumo Accuforce NC PTCA Balloon 5 x 12 mm
Terumo Accuforce NC PTCA Balloon 5 x 12 mm. Device: Non-compliant PTCA balloon catheter; Balloon diameter: 5 mm; Balloon length: 12 mm; Balloon construction: Triple-layer: elastomer inner/outer, polyamide middle layer; Nominal pressure: 12 atm. Wholesale supply by Med Technologies — request a quote.
- Device
- Non-compliant PTCA balloon catheter
- Balloon diameter
- 5 mm
- Balloon length
- 12 mm
- Balloon construction
- Triple-layer: elastomer inner/outer, polyamide middle layer
- Nominal pressure
- 12 atm
- 全新,原厂包装
- 批号与有效期可追溯
- CE / MDR 文件
- 发货至 4 大洲
技术参数
- 制造商
- Terumo
- 参考编号
- DC-RM5012HSW
- Device
- Non-compliant PTCA balloon catheter
- Balloon diameter
- 5 mm
- Balloon length
- 12 mm
- Balloon construction
- Triple-layer: elastomer inner/outer, polyamide middle layer
- Nominal pressure
- 12 atm
- Rated burst pressure
- up to 22 atm
- Entry profile
- 0.43 mm
- Usable length
- 145 cm
- Shaft
- Proximal 1.9F / distal 2.6F
- Guidewire
- 0.014″
- 分类
- Balloon Catheter
- 状态
- 全新,原厂包装
依据制造商文件。请始终参照器械随附的使用说明书。
产品说明
Accuforce is Terumo’s non-compliant PTCA balloon for high-pressure post-dilatation of stents and dilatation of resistant, calcified lesions. A triple-layer balloon (soft elastomer inner and outer layers over a polyamide core) gives a rated burst pressure of up to 22 atm with minimal diameter growth, so the balloon stays at the intended size during stent optimisation; the flexible 0.43 mm tip, thin short markers and hydrophilic shaft improve re-crossing of deployed stents.
Reference DC-RM5012HSW: 5 mm × 12 mm, nominal pressure 12 atm, 145 cm usable length, 1.9F/2.6F shaft, 0.014″ guidewire, 5F guide compatible (kissing balloon in 6F).
Available to order from Med Technologies — new, in original manufacturer packaging, CE-marked, with lot traceability. Contact us for pricing, stock and compatible sizes.
Specifications
| Manufacturer | Terumo |
|---|---|
| Reference | DC-RM5012HSW |
| Device | Non-compliant PTCA balloon catheter |
| Balloon diameter | 5 mm |
| Balloon length | 12 mm |
| Balloon construction | Triple-layer: elastomer inner/outer, polyamide middle layer |
| Nominal pressure | 12 atm |
| Rated burst pressure | up to 22 atm |
| Entry profile | 0.43 mm |
| Usable length | 145 cm |
| Shaft | Proximal 1.9F / distal 2.6F |
| Guidewire | 0.014″ |
| Category | Balloon Catheter |
| Condition | New, original manufacturer packaging |
| Certification | CE marked |
| Availability | Available to order – request a quote |
Need this reference or a compatible size? Med Technologies supplies hospitals and distributors worldwide. Request a quote for pricing, stock and lead time.



